Oct 2011

security monitoring system

home keyless entry systemsDual Tech motion detectors use two different technologies in the same unit: passive infrared and microwave. These devices are designed to avoid false alarms since both technologies must detect motion before setting off the alarm. Photoelectric Sensors: These sensors project a beam of light across a hall or doorway to detect motion and are triggered when a person passing through interrupts the beam. Glass Break Detectors: Usually mounted near windows to detect the specific high frequency sound of glass being shattered. They are usually installed on a wall opposite or adjacent to the protected glass and are effective within about 15′ to 25′. Smoke and Heat Detectors: Detect smoke and heat. Chapter II:Our Home Alarm SystemOur Home Alarm System:Our project’s main concern was to build a Home Alarm System using a PIC microcontroller. We started off our project by coding the Keypad, then LCD and the final touch was the sensor. We also added two types of buzzers: one to sound the alarm and the other as a key tone buzzer. The final result turned out to be the following:Figure3. Our Home Alarm SystemMaterials Used: Cost:PIC16F877A 7$4X4 Keypad 2$JHD 162A LCD 6$6V Alarm Buzzer 0.

Uncategorized | 5 Comments

Oct 2011

home security systems toronto

small business security camera systemFurthermore, a burglar may want to break the door of your house while barging in. You also might have to cope with broken windows, smashed furniture and other general damage. Making up for this damage will be expensive not just time wise but also requires great deal of effort since burglars these days are interested in expensive items. They search for important identifications such as your bank statements, passports, and credit cards, essentially whatever they get their hands on. The misuse of these documents will disturb your economic balance. Therefore, it is recommended to install a home alarm system at your place. Sensors are the most vital part of the system; they act like the eyes and ears of a home alarm system by monitoring break in points and interior areas. The typical sensors, which are usually two magnets, are generally installed on doors and windows such that one magnet is connected to the door or window and the other is connected to the door or window frame. When the door or window is opened, one magnet is removed from the surrounding area of the other and the sensor registers that the door has been opened. More advanced home alarm systems may also contain vibration sensors to detect when glass has been broken by measuring the vibrations caused by the breakage. Also, many systems use motion sensors that compute the proximity of a room’s walls by producing infrared beams and measuring the time required for them to bounce back; if a beam comes back sooner than expected, it likely bounced off of a person and the sensor registers motion.

Uncategorized | 3 Comments